my_Pagemy_WistListbasketcs_center
신상품 New Products
전체보기 All
손바닥 컴퓨터들
안드로이드 Android
아두이노 Arduino
아두이노 킷 Arduino Kit
아두이노 확장쉴드
릴리패드 LilyPad
센서 Sensors
엑츄에이터 Actuators
사운드 Sound
디스플레이 Display
통신 Communication
첨단조명 EL Wire
전기전자 기초소자
측정기/도구류 Tools
전원 및 배터리
케이블/커넥터 Cables
엑세서리/기구류
신에너지
책 도서류 Book
조형재료
로봇제작용 Robot Platform
무선 전자태그 RFID
맞춤 상품
한정수량 특가
한정수량 특특가
현재위치: > 전체보기
[TSD13298] 베어 전도성 터치 보드 (Bare Conductive Touch Board)
판매가_VAT별도 : 115,000원
수량 :
updown
SNS 상품홍보 : twitter로 보내기 facebook로 보내기     
판매가격 (VAT별도)
 
 

Description: The Touch Board from Bare Conductive is an easy-to-use Arduino@Heart board that gives you the ability to turn almost any material or surface into a sensor. Each Touch Board offers 12 electrodes for your a conductive ink or other type of connector that can be drawn or attached to create light switches, musical instruments, or custom interactive surfaces all through the Arduino IDE. The Bare Conductive Touch Board is even equipped with an onboard MP3 player making each board capable of turning your favorite song into a MIDI tune. Simply put: if you can do something with an Arduino or Arduino-compatible device, you can do it (and more) with the Touch Board and some conductive ink as well!

The Touch Board has been specifically designed to be a microcontroller board with dedicated capacitive touch and MP3 decoder ICs. Each board has a 3.5mm audio jack and micro SD card holder (for file storage), as well as its own 128MB micro SD card. The Touch Board has been based around the ATmega32U4 and runs at 16MHz from 3-5.5VDC. It has everything you would expect to be on an Arduino-type device including, a micro USB connector, a JST connector for an external lithium polymer (LiPo) cell, a power switch and a reset button. It should be known that there is limit of 32GB to the microSD card sized used with this board.

The Bare Conductive Touch Board is similar to the Arduino Leonardo and can be programmed using the Arduino IDE (1.5.6 or later). To power the Touch board simply attach it to a micro USB connection or from a 3.7V lithium polymer (LiPo) cell connected to the 2-way JST PH series connector. The onboard ATmega32U4 can appear to a connected computer as a mouse or a keyboard, serial port, or USB MIDI device.

Note: The Touch Board does NOT include a micro USB cable or LiPo battery. These items will need to be purchased separately and can be found in the Recommended Products section below.

Includes:

  • 1x Touch Board
  • 1x microSD Card (128MB)

Features:

  • Arduino compatible (recognized as an Arduino Leonardo in IDE)
  • Atmel ATMega32U4 Microprocessor
  • Freescale MPR121 dedicated touch interface
  • VLSI VS1053B audio processor
  • Arduino Shield Compatible (check pins available)
  • 32 KB of Flash Memory of which 4 KB is used for bootloader
  • 5V operating voltage (automatic voltage selector for USB or battery operation)
  • Built in LiPo battery charging with onboard boost circuit for 5V operation
  • 16 MHz clock speed
  • Can be powered and programmed over USB
  • 20 digital I/O pins (3 used for Touch IC and 5 for MP3 IC – can be disabled)
  • 7 PWM channels
  • 12 analog input channels
  • 12 Touch electrodes of which 8 can be configured as extra digital inputs or outputs with PWM capability
  • 84mm x 62mm foot print with maximum height of 10mm (audio connector)
  • Up to 32GB via micro SD card
  • HID Capable

Documents:






 
번호 제목 작성자 작성일 조회
 
 
--

-배송 비용 : 10만원 이상 구매시 배송료 무료 (VAT별도)
-결제 완료 후, 1~3일 이내 배송(pm 3시00분 이전 입금완료시 당일발송하며 통상 익일수령이 가능하십니다.)
-도서, 산간, 오지지역 배송시 배송비가 추가 발생되지 않습니다. (단, 배송소요 시간이 D+1 정도 소요)

-주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 3일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

   
--

-수령일로부터 7일이내 반품/환불 가능합니다.
-상품수령 시와 동일한 택배사를 이용하셔야 합니다. (타택배사 이용시 추가비용발생 경우 고객 부담)
-고객변심의 반품은 배송비를 차감한 금액이 환불되며, 상품 개봉 및 훼손되었을 경우 반품/교환/환불이 불가능합니다
-상품 불량일 경우 배송비포함 전액이 환불됩니다.
-특정브랜드의 교환/환불/AS에 대한 개별기준이 명시된 경우 브랜드의 정책이 우선 적용됩니다.

상품상세|결제|배송|교환및반품|서비스문의|상품Q&A|관련상품 
[TF0065TOY] Bare Conductive Touch Board Starter Kit
178,200원