my_Pagemy_WistListbasketcs_center
신상품 New Products
전체보기 All
손바닥 컴퓨터들
안드로이드 Android
아두이노 Arduino
아두이노 킷 Arduino Kit
아두이노 확장쉴드
릴리패드 LilyPad
센서 Sensors
엑츄에이터 Actuators
사운드 Sound
디스플레이 Display
통신 Communication
첨단조명 EL Wire
전기전자 기초소자
측정기/도구류 Tools
전원 및 배터리
케이블/커넥터 Cables
엑세서리/기구류
신에너지
책 도서류 Book
조형재료
로봇제작용 Robot Platform
무선 전자태그 RFID
맞춤 상품
한정수량 특가
한정수량 특특가
현재위치: > 전체보기
[TP]정품 아두이노 에스플로라 - 가속도,빛,소리,온도 센서 및 부저,RGB LED 내장 (Arduino Esplora)
판매가_VAT별도 : 70,000원
수량 :
updown
SNS 상품홍보 : twitter로 보내기 facebook로 보내기     
판매가격 (VAT별도)
 
 

조이스틱과 버튼기능은 기본!  가속도 센서, 소리 센서, 온도 센서, 광센서, 슬라이드바 , RGB LED, 부저가 내장된 아두이노 보드입니다.   키보드 및 마우스 기기(HID)로 프로그래밍 해주면  마우스와 키보드 역활까지 대체할 수 있는 재주 많은 아두이노 보드입니다.  

 

아두이노 게임기 개발, 로봇 콘트롤러,  PC 게임용 게임패드로 활용 가능합니다!

안내. PC와 연결시 필요한 micro USB 케이블이 포함되어 있습니다.

 


Arduino Esplora Front


Arduino Esplora Rear

Overview

The Arduino Esplora is a microcontroller board derived from theArduino Leonardo. The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use setof onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a step-by-step introduction to the Esplora, check out the Getting Started with Esplora guide.

The Esplora has onboard sound and light outputs, and several input sensors, including a joystick, a slider, a temperature sensor, an accelerometer, a microphone, and a light sensor. It also has the potential to expand its capabilities with two Tinkerkit input and output connectors, and a socket for a color TFT LCD screen.

Like the Leonardo board, the Esplora uses an Atmega32U4 AVR microcontroller with 16 MHz crystal oscillator and a micro USB connection capable of acting as a USB client device, like a mouse or a keyboard.

In the upper left corner of the board there is a reset pushbutton, that you can use to restart the board. There are four status LEDS :

  • ON [green] indicates whether the board is receiving power supply
  • L [yellow] connected directly to the microcontroller, accessible through pin 13
  • RX and TX [yellow] indicates the data being transmitted or received over the USB communication

The board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable to get started.

The Esplora has built-in USB communication; it can appear to a connected computer as a mouse or keyboard, in addition to a virtual (CDC) serial / COM port. This has other implications for the behavior of the board; these are detailed on the getting started page.

Summary

Microcontroller ATmega32u4
Operating Voltage 5V
Flash Memory 32 KB of which 4 KB used by bootloader
SRAM 2.5 KB
EEPROM 1 KB
Clock Speed 16 MHz

Schematic & Reference Design

EAGLE files: Attach:arduino-esplora-reference-design.zip
Schematic: Attach:arduino-esplora-schematic.pdf

 


Memory

The ATmega32u4 has 32 KB (with 4 KB used for the bootloader). It also has 2.5 KB of SRAM and 1 KB of EEPROM (which can be read and written with the EEPROM library).

Input and Output:

The design of the Esplora board recalls traditional gamepad design with an analog joystick on the left and four pushbuttons on the right.

The Esplora has the following on-board inputs and outputs :

  • Analog joystick with central push-button two axis (X and Y) and a center pushbutton.
  • 4 push-buttons laid out in a diamond pattern.
  • Linear potentiometer slider near the bottom of the board.
  • Microphone for getting the loudness (amplitude) of the surrounding environment.
  • Light sensor for getting the brightness.
  • Temperature sensor reads the ambient temperature
  • Three-axis accelerometer measures the board's relation to gravity on three axes (X, Y, and Z)
  • Buzzer can produce square-waves.
  • RGB led bright LED with Red Green and Blue elements for color mixing.
  • 2 TinkerKit Inputs to connect the TinkerKit sensor modules with the 3-pin connectors.
  • 2 TinkerKit Outputs to connect the TinkerKit actuator modules with the 3-pin connectors.
  • TFT display connector connector for an optional color LCD screen, SD card, or other devices that use the SPI protocol.

In order to utilize the total number of available sensors, the board uses an analog multiplexer. This means a single analog input of the microcontroller is shared among all the input channels (except the 3-axis accelerometer). Four additional microcontroller pins choose which channel to read.

Communication

The Leonardo the Esplora has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The ATmega32U4 provides serial (CDC) communication over USB and appears as a virtual com port to software on the computer. The chip also acts as a full speed USB 2.0 device, using standard USB COM drivers. On Windows, a .inf file is required. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TX LEDs on the board will flash when data is being transmitted via the USB connection to the computer.

The ATmega32U4 also supports SPI communication, that can be accessed through the SPI library.

The Esplora can appear as a generic keyboard and mouse, and can be programmed to control these input devices using the Keyboard and Mouse libraries.

Programming

The Esplora can be programmed with the Arduino software (download). Select "Arduino Esplora" from the Tools > Board menu. For details, see the getting started page.

The ATmega32U4 on the Arduino Esplora comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the AVR109 protocol.

You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header; see these instructions for details.

Esplora Library

To facilitate writing sketches for the Esplora, there is a dedicated library that contains methods for reading the sensors and writing to the outputs on-board.

The library offers high level methods which provide pre-processed data, like degrees Fahrenheit or Celsius from the temperature sensor. It also enables easy access to the outputs, like writing values to the RGB LED.

Visit the Esplora library reference page to see the complete documentation of the library and examples.

Automatic (Software) Reset and Bootloader Initiation

Rather than requiring a physical press of the reset button before an upload, the Esplora is designed in a way that allows it to be reset by software running on a connected computer. The reset is triggered when the Esplora's virtual (CDC) serial / COM port is opened at 1200 baud and then closed. When this happens, the processor will reset, breaking the USB connection to the computer (meaning that the virtual serial / COM port will disappear). After the processor resets, the bootloader starts, remaining active for about 8 seconds. The bootloader can also be initiated by pressing the reset button on the Esplora. Note that when the board first powers up, it will jump straight to the user sketch, if present, rather than initiating the bootloader.

Because of the way the Esplora handles reset it's best to let the Arduino software try to initiate the reset before uploading, especially if you are in the habit of pressing the reset button before uploading on other boards. If the software can't reset the board you can always start the bootloader by pressing the reset button on the board.

USB Overcurrent Protection

The Esplora has a resettable polyfuse that protects your computer's USB ports from shorts and overcurrent. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. If more than 500 mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.

Physical Characteristics

The maximum length and width of the Esplora PCB are 6.5 and 2.4 inches respectively, with the USB and TinkerKit connectors extending beyond the latter dimension. Four screw holes allow the board to be attached to a surface or case.

 
 
번호 제목 작성자 작성일 조회
6 에스플로라가 갑자기 인식이 안되는데요. 박선균 2015/10/19 2
5 레오나르도보드 계열과 UNO보드와의 시리얼 아트로봇CT 2015/10/19 3
4 이제품에 시리얼통신하고싶어요 우윤우 2014/05/11 4
3 이제품에 시리얼통신하고싶어요 아트로봇 2014/05/11 3
2 부속 연결품 없나요?? 공주대학교산학협력단 2013/12/18 2
이전 [1] [2] 다음
 
 
--

-배송 비용 : 10만원 이상 구매시 배송료 무료 (VAT별도)
-결제 완료 후, 1~3일 이내 배송(pm 3시00분 이전 입금완료시 당일발송하며 통상 익일수령이 가능하십니다.)
-도서, 산간, 오지지역 배송시 배송비가 추가 발생되지 않습니다. (단, 배송소요 시간이 D+1 정도 소요)

-주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 3일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

   
--

-수령일로부터 7일이내 반품/환불 가능합니다.
-상품수령 시와 동일한 택배사를 이용하셔야 합니다. (타택배사 이용시 추가비용발생 경우 고객 부담)
-고객변심의 반품은 배송비를 차감한 금액이 환불되며, 상품 개봉 및 훼손되었을 경우 반품/교환/환불이 불가능합니다
-상품 불량일 경우 배송비포함 전액이 환불됩니다.
-특정브랜드의 교환/환불/AS에 대한 개별기준이 명시된 경우 브랜드의 정책이 우선 적용됩니다.