전체상품목록 바로가기

본문 바로가기


현재 위치
  1. home
  2. RFID
이전상품 다음 제품 보기
[TA789] RFID NFC 쉴드 A형 + RFID 태그 1개 포함(Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras )

[TA789] RFID NFC 쉴드 A형 + RFID 태그 1개 포함(Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras )

기본 정보
판매가 [vat별도] 42,000원
수량 수량증가수량감소
브랜드 Adafruit(에이다프릇)
국내·해외배송 국내배송
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만2,700원
  • 2.00kg 이상 ~ 5.00kg 미만3,000원
닫기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.  

상품 옵션
옵션 선택
상품 목록
product name quantity price
[TA789] RFID NFC 쉴드 A형 + RFID 태그 1개 포함(Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras ) 수량증가 수량감소 ()
TOTAL(ea) : 0 (0개)
RFID 및 NFC 를 위한 아두이노 쉴드입니다.  아두이노(별매품)에 장착하여 RFID(13.56MHz) 태그를 인식하거나 근접무선통신(NFC)에 활용 가능합니다. ( 13.56MHz Mifare RFID 카드형 Tag 가 함께 제공됩니다)

DESCRIPTION

We've taken our popular Adafruit PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The Adafruit NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities, our Arduino library currently only supports reading/writing tags, and does not support phone-to-shield communication, tag emulation (which requires an external 'secure element' only available from NXP) or other more advanced features at this time.

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC.

Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag.

The Adafruit shield was designed by RF engineers using the best test equipment to create a layout and antenna with 10cm (4 inch) range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier.

This shield is designed to use I2C or SPI communication protocols. I2C is the default, as it uses fewer pins: analog 4 and 5 are used for I2C (of course you can still connect other I2C devices to the bus). Digital #2 is used for "interrupt" notification. This means you don't have to sit there and 'poll' the chip to ask if a target tag has been found, the pin will pull low when a card, phone, etc is within range. You can adjust which pin is used if you need to keep digital #2 for something else. It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB. Compatible with any "classic" Arduino - NG, Diecimilla, Duemilanove, UNO - as well as Mega R3 or later. For using the I2C interface with Mega R2 or earlier, two wires must be soldered as the I2C pins are in a different location on earlier Megas.

Comes with: the Adafruit NFC/RFID PN532 shield including a tuned 13.56MHz stripline antenna, 36-pin 0.1" header for attaching the shield to an Arduino. If you want to stack another shield on top or below, check out our stacking headers that allow pass-through stacking. We also toss in a 13.56MHz RFID/NFC 1K card! (You can get more tags from us here)

https://www.youtube.com/embed/WgLV5X1iWWw

Check out our RFID/NFC project page for documentation, libraries, and other support

Please note that there is a minor issue with the current version of the boards (v1.0). SEL0 and SEL1 are reversed on the silkscreen, so SEL0 is actually SEL1 and vice versa. This only affects users who wish to use UART or SPI to communicate with the PN532 instead of the default I2C, which is the communication bus supported by Adafruit's PN532/NFC library for Arduino. This will be update on the next version of the boards.

 

TECHNICAL DETAILS

  • 2.1" (53.3mm) x 4.7" (117.7mm) and 0.425" (1.1mm) thick.
  • This board/chip uses I2C 7-bit address 0x48

EagleCAD PCB files, datasheets, Fritzing object and more available in the product tutorial

 

LEARN

 

NFC Ring Password Helper

Log in with the wave of a hand
Collin's Lab: RFID
Identifying object via radio waves
Adafruit PN532 RFID/NFC Breakout and Shield
Radio Frequency ID and Near Field Communication using the PN532
Babel Fish
RFID language learning toy with sound

 



배송정보

  • 배송 방법택배
  • 배송 지역전국지역
  • 배송 비용2,700원 ~ 3,000원
  • 배송 기간1일 ~ 2일
  • 배송 안내

    - 품절이나 주문상품 아이콘이 없는 제품은 하나 이상의 재고를 보유하고 있습니다.
    - 산간벽지나 도서지방의 경우 별도의 추가금액을 지불하지 않으셔도 됩니다. 전국동일 (제주도 포함)

    - 결제( 입금완료 )완료 후 1~2일 이내에 주문하신 제품을 받아 보실 수 있습니다. ( 우체국택배 )  단,  품절 또는 주문상품( 해외수입 )의 경우 1~2주 정도 소요됩니다.

    - 교환/반품의 경우 수령한 날로부터 7일까지 가능합니다. 단, 포장을 개봉하여 재판매가 불가할 경우 교환/반품이 불가합니다.

ITEM REVIEW상품의 사용후기를 적어주세요.

상품후기작성 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품사용후기
no subject writer data hit 평점
1 만족 네이버 페이 구매자 2017-04-12 25 5점  
  1. 1

ITEM Q&A상품에 대해 궁금한 점을 해결해 드립니다.

상품문의등록 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품 Q&A
no subject writer data hit
20 문의드립니다. 전문휘 2016-10-14 2
19 문의드립니다. 아트로봇CT 2016-10-14 2
18 문의합니다 주민주 2014-11-24 2
17 문의합니다 아트로봇 2014-11-24 1
16 상품이 품절되었는데 재입고는 언제되는지 알수있을까요? 박찬규 2014-10-10 26
  1. 1
  2. 2
  3. 3
  4. 4